Trim Presses and Punch Presses

LR 5

Feature

The LR Series Trim Presses feature massive welded and stress relieved frames to accommodate the required trimming loads on each of the two horizontal and two vertical press models. Forward and reverse trim configurations of the horizontal presses are available. Servo driven nip wheels or servo mechanical pick feeds are available. The vertical models feature fore and aft servo index wheels for maximum speed and accuracy in indexing. Parallel treadle motion, servo ejector and integration with downstream automation are available.
 
25% increased rigidity over existing Version 5.0HD

Platen Deflection reduced 30% -Rod end Span across moving platen is 21% narrower

Platen guided by size 85 Roller Blocks on Linear Rails (larger than competitors) for longer life and increased rigidity.

Axillary Upper Roller Rails optional

Drive motor options up to 50 hp -Main drive gearbox size up to 10"

Optional Rotational or inline counterbalance systems

Side Load Tool change combined with Elevating Treadle reduces trim tool change over itme and increases line efficiency.

Dual Drive Nip treadle allows increased user process adjustment.

Treadle Guide mounts rigid, rigid guide clamps, guide locators to cavity centers, lower support for stripper fingers. All for PP guiding and web stripping.

Manual Platen advance wheel replaces wrench

Push/Pull arrangement for drive lockout replaces wrench

360 deg catwalk gives safe access to front and back sides of treadle

Canopy Guide stiffeners and Canopy guide clamp tool to lock from floor level.

Motorized Canopy wheel width adjust

Total machine mass 36,500lb

Specifications

Trim Press Tonnage 45
Trim Press Stroke Options 4" min up to 16" max
Maximum Trim Press CPM 4"/135, 6"-110, 8"/100, 12"/80, 16"/60 CPM
Counter-Balance Rotating Standard
Stroke + Shut Height Maximum 34"
Stationary Platen Opening 14" x58" Others up to 22" x 58"
Maximum Part Depth 11"
Parallel Treadle Motion Standard
Canopy Assist Standard
Servo Pick Index Standard
Servo Mechanical Pick Index Optional
Servo Ejector Optional
Reverse Trim Configuration Optional
Trim Press Sync to Former Standard
Automated Packaging Optional
Trim Press Electrical Service 150 amp, 480 Volt
Compressed Air Consumption 10 CFM @100 PSI